Search for: All records

Electroless coating brings the advantage of providing films on the complex geometry of additively manufactured components. However, there is a knowledge gap about the impact of AM part surface and postprocessing parameters on the quality of electroless coating. This study explores the application of three solution-based surface finishing techniques on the microstructure and surface hardness of additively manufactured stainless steel components coated with electroless nickel films. Given that AM techniques for metal parts often yield surfaces with inherently rough textures and differences in properties along the different planes, we investigated their relationship with nickel coating. To mitigate the impact of surface irregularities on electroless nickel coating quality, this research evaluated the effectiveness of chemical polishing (CP) and Electropolishing (EP) as post-processing treatments for AM stainless steel. Characterization of the treated samples was conducted using the analytical Digital Microscope, Scanning Electron Microscope (SEM), and scratch tester. Additionally, the study incorporated an instant segmentation machine learning algorithm to overcome image analysis challenges. The findings indicate that EP and CP significantly improve surface smoothness, decreasing the arithmetical mean height (Ra) by as much as 4 µm and 10 µm, respectively. Furthermore, the nickel-coated AM samples demonstrated an enhancement in scratch resistance, exhibiting up to a two-fold increase in surface hardness compared to their as-built counterparts. Taguchi design of the experiment was applied to investigate the effect of process parameters. This study provides insights for developing improved surface quality and acquiring new properties via the coating process to make AM parts suitable for challenging environments and novel applications. 

Abstract The majority of power consumption nowadays goes to heating. Global warming, air and water pollution caused by burning fossil fuel for heating encourage researchers and engineers to focus more on renewable energy. The solar system is one of Earth’s primary sources of clean power. Apart from photovoltaic panels and their effectiveness of power generation contribution, solar heaters are primarily used in different applications to recover heating needs in residential and commercial buildings. This paper focuses on an experimental study to generate heat by a solar system using metallic strips immersed in cement inside a solar vacuum tube. Heat can be transferred from inside the tube to the outside using metallic strips with high conductivity. Then, the metallic strips can be used as a heater to heat water or air in an isolated tank by direct contact between the hot strips and the fluid. In order to keep the system providing heat after the absence of sun’s rays, cement is used in this experiment as a heat repository. 

Abstract This research investigates the feasibility of electroless nickel deposition on additively manufactured stainless steel samples. The prevalent additive manufacturing techniques for metal components generate a surface with rough characteristics, which can result in a higher likelihood of fatigue and the initiation of cracks or fractures in the printed part. As a result, using as-manufactured components in the final product is impractical, which requires post-processing to create a smoother surface. This study assesses chempolishing (CP) and Electropolish (EP) techniques for post-processing additively manufactured stainless steel components. CP is a purely chemical process that involves continuous anodization of the sample, resulting in oxidation-reduction. CP has a significant advantage in creating a uniform and smooth surface, irrespective of the size or geometry of the component. Conversely, EP is an electrochemical process that necessitates an electric current to facilitate polishing. EP produces an exceptionally smooth surface that reduces surface roughness to a sub-micrometer level. We observed that EP and CP techniques reduced the surface roughness’s arithmetical mean height (Ra) by up to 4 μm and 10 μm, respectively. In this study, we investigate the application of electroless nickel deposition on additively manufactured (AM) components using different surface finishing techniques, including electro-polishing (EP), chemo-polishing (CP), and as-built components. Electroless nickel plating aims to enhance the surface hardness and resistance of manufactured components to withstand harsh environmental conditions. The electroless nickel plating process is less complicated than electroplating and does not require using an electric current through the chemical bath solution for nickel deposition. For this study, we used low-phosphorus (2–5% P), medium-phosphorus (6–9% P), and high-phosphorus (10–13% P) nickel solutions. We used the L9 Taguchi design of experiments (TDOE) to optimize these Ni deposition experiments, which consider solution content, surface finish, geometry plane, and bath temperature. The pre- and post-processed surfaces of the AM parts were analyzed using the KEYENCE Digital Microscope VHX-7000 and Phenom XL Desktop SEM. We apply a machine learning-based instance segmentation technique to improve the identification of nickel deposition and surface topology of microscopic images. Our experiments show that electroless nickel deposition produces uniform Ni coating on the additively manufactured components at up to 20 μm per hour. Mechanical properties of as-built and Ni-coated AM samples were evaluated using a standard 10 N scratch test. It was found that the nickel-coated AM samples were up to two times more scratch-resistant than the as-built samples. Based on our findings, we conclude that electroless nickel plating is a robust and viable option for surface hardening and finishing AM components for various applications and operating conditions. 

Additively manufactured metal components often have rough and uneven surfaces, necessitating post-processing and surface polishing. Hardness is a critical characteristic that affects overall component properties, including wear. This study employed K-means unsupervised machine learning to explore the relationship between the relative surface hardness and scratch width of electroless nickel plating on additively manufactured composite components. The Taguchi design of experiment (TDOE) L9 orthogonal array facilitated experimentation with various factors and levels. Initially, a digital light microscope was used for 3D surface mapping and scratch width quantification. However, the microscope struggled with the reflections from the shiny Ni-plating and scatter from small scratches. To overcome this, a scanning electron microscope (SEM) generated grayscale images and 3D height maps of the scratched Ni-plating, thus enabling the precise characterization of scratch widths. Optical identification of the scratch regions and quantification were accomplished using Python code with a K-means machine-learning clustering algorithm. The TDOE yielded distinct Ni-plating hardness levels for the nine samples, while an increased scratch force showed a non-linear impact on scratch widths. The enhanced surface quality resulting from Ni coatings will have significant implications in various industrial applications, and it will play a pivotal role in future metal and alloy surface engineering. 

Surface finishing in additive manufacturing (AM) is a technological bottleneck. The field of surface finishing of AM parts is vast because it not only focuses on roughness reduction in the hard-to-access internal surfaces but also includes the scope of adding coatings and sensors. Even though metal AM component is reaching the density and bulk microstructure at par or even better than conventionally produced components, adverse impact of surface roughness and imperfections is becoming the major obstruction. It is observed that external and internal surface roughness of AM components is a high probability cause of many unavoidable issues such as corrosion, incorrect tolerance estimations during the build stage, and the fatigue failure of parts before the expected life cycle. At present, AM field mainly focuses on improving and enhancing the internal and external surface roughness to pass the stringent qualification requirements for actual applications. To address these challenges, researchers worldwide are conducting many experiments and developing different surface finishing techniques. This paper reviews the state-of-the-art knowledge and processes of different surface finishing technology that can be applied to AM metal components. This article mainly highlights several liquid-based surfaces finishing approaches to develop promising surface microstructures on interior and exterior surfaces as a micromachining tool. The future of making strong and self-monitoring AM component requires broadening of surface finishing field and including advanced topics such as coatings and adding sensor technology. We also discuss new frontiers and the scope of future work in the surface finishing field to bring attention to related concerns and possibilities associated with making smart and strong AM components for twenty-first-century integrated engineering systems. 

This study investigates the application of electroless nickel deposition on additively manufactured stainless steel samples. Current additive manufacturing (AM) technologies produce metal components with a rough surface. Rough surfaces generally exhibit fatigue characteristics, increasing the probability of initiating a crack or fracture to the printed part. For this reason, the direct use of as-produced parts in a finished product cannot be actualized, which presents a challenge. Post-processing of the AM parts is therefore required to smoothen the surface. This study analyzes chempolish (CP) and electropolish (EP) surface finishing techniques for post-processing AM stainless steel components CP has a great advantage in creating uniform, smooth surfaces regardless of size or part geometry EP creates an extremely smooth surface, which reduces the surface roughness to the sub-micrometer level. In this study, we also investigate nickel deposition on EP, CP, and as-built AM components using electroless nickel solutions. Electroless nickel plating is a method of alloy treatment designed to increase manufactured component’s hardness and surface resistance to the unrelenting environment. The electroless nickel plating process is more straightforward than its counterpart electroplating. We use low-phosphorus (2–5% P), medium-phosphorus (6–9% P), and high-phosphorus (10–13% P). These Ni deposition experiments were optimized using the L9 Taguchi design of experiments (TDOE), which compromises the prosperous content in the solution, surface finish, plane of the geometry, and bath temperature. The pre- and post-processed surface of the AM parts was characterized by KEYENCE Digital MicroscopeVHX-7000 and Phenom XL Desktop SEM. The experimental results show that electroless nickel deposition produces uniform Ni coating on the additively manufactured components up to 20 μm per hour. Mechanical properties of as-built and Ni coated AM samples were analyzed by applying a standard 10 N scratch test. Nickel coated AM samples were up to two times scratch resistant compared to the as-built samples. This study suggests electroless nickel plating is a robust viable option for surface hardening and finishing AM components for various applications and operating conditions.